Homeowners and tenants in Worthing know very well the inconveniences that clogged drains can bring. Clogged drains can hamper the flow of water, lead to bad odors, and in serious cases, result in costly repairs. Although conventional drainage services are available, it could be an added advantage if you had some tips on your fingertips about how you can unblock clogged drains. In this article, we will guide you through some effective ways to unblock clogged drains in Worthing, beginning with simple methods that require elementary tools you probably have at home.
Before you start, gather necessary materials like a plunger, plumber’s snake, and a hand auger. You will also need rubber gloves to protect your hands from bacteria or harsh cleaning chemicals.
Firstly, the plunger is one of the most straightforward, yet highly efficient tools to eliminate blockages in drains. To use it, ensure that the sink, tub, or shower has enough water to cover the base of the plunger. Position the plunger over the drain and start plunging aggressively. If the water drains away, congratulations, you have successfully unclogged your drain. If not, worry not and try the next step.
If the plunger fails to clear the clog, you might want to try a plumber’s snake. This tool is a flexible, coiled wire that can reach deep into the drain pipe. To use the plumber’s snake, push it down the drain until it meets the obstruction. Turn the handle to break up the blockage, and then retract the snake, pulling up any debris. For tougher blockages, a power snake may be needed.
Take note that for stubborn clogs, a hand auger might be the tool you need. A hand auger has a longer reach compared to a plumber’s snake and can tackle blockages further down the drain pipe. Insert the auger into the drain and keep turning the handle until you hit the clog. Once you have, keep turning the handle to break the clog. Keep in mind to pull some parts of the auger out sometimes to clean it.
Apart from these manual methods, there are also chemical drain cleaners available on the market. These can be an effective solution, but they should be used responsibly, as they can be harmful to the environment and can cause damage to pipes if used repeatedly. Ensure to wear gloves and follow the instructions carefully when using.
Another environmentally-friendly and safe method to try is using baking soda and vinegar. Pour half a cup of baking soda into the drain followed by half a cup of vinegar. Let the combination sit in the drain for about 20 minutes, then rinse with boiling water. This combination causes a chemical reaction effective at dissolving some types of clogs.
Occasionally, the blockages may persist after trying these methods. In such instances, this hints at a more severe underlying issue, which might require professional attention. Do not insist on DIY methods, especially if you are not confident in handling tasks like disassembling pipes.
Plumbing service providers in Worthing are just a call away and are well-equipped to handle all drain blocked drains worthing issues. They have cameras that can go down the drain and diagnose the exact problem, and therefore solve it quickly and efficiently.
In conclusion, while there are numerous DIY methods for unblocking clogged drains in Worthing, it is essential to follow each step with caution to avoid escalating the issue. However, when the blockage becomes too stubborn, don’t hesitate to reach out for professional help since they have the experience and the needed tools to handle all types of blockages.